TEMPLATE GALLERY.........click on photo for larger view
R12 GENERAL PURPOSE Contains many useful symbols, including
circles, squares, hexagons, triangles and rectangles
in a wide range of sizes for use in general
drafting or related work. Includes a 6" scale in 16ths.
Size: 6 ½" X 4 ¾". Thickness: .030".
R14 PEE-WEE GENERAL PURPOSE Contains many useful symbols and
geometric shapes. Circles, squares, triangles and hexagons from 1/8" to 7/16" in
1/16" increments. Size: 4 ¾" X 2 ½".
Thickness: .020".
Also available in metric, No. R-2014.
R-16 ALL-PURPOSE Features many useful symbols and geometric shapes,
including a 3" protractor, irregular curve and a 4"
scale with holes for use as a compass. Circles, squares, triangles and hexagons from 1/16"
to ½". Size: 3" X 6 1/8". Thickness: .030"
R-18 MASTER GENERAL PURPOSE Contains most useful symbols.
Circles, squares, hexes, triangles: 3 sizes and 2
styles of brackets, 2 North arrows, 2 sizes of arrowheads,
30o, 45o, 60o,
90o triangles; includes a 3" protractor and useful inch scale
on bottom edge. Size: 10 ¼" X 5 ½".
Thickness: .030".
R-19 SKETCH MATE Circles, hexagons, triangles and squares from 3/32" to ½".
Includes two t" scales in 10th and
16th. Size: 5 15/16" X 3 ¼". Thickness: .030".
Also available in metric, No. R-2019.
R-20 SKETCH SCALE A handy, transparent pocket rule scaled in
10th and 16ths, with common cut-outs for making
field sketches and other drawings. Size: 6 ½" X
1 ¾". Thickness: .030".
R-30 SQUARES Squares from 1/16" to 11/32" in 1/64" increments; from 3/8" to ¾" in
1/32" increments; from 13/16" to 1" in
1/16" increments; from 1 1/8" to 1 3/8" in
1/8" increments. Squares up to 4" may
be construction by using inch scales on sides. Size: 7 3/8" X 4". Thickness: .030".
Also available in metric, No. R-2030.
R-32 ARROWHEADS 50 arrowheads, 10 sizes for each of 5 different styles. Includes
3 convenient scales: 1/10", 1/16" and mm.
Size: 4 5/8" X 4 3/8". Thickness: .030".
R-37 DIRECTIONAL ARROWS Various styles and shapes of directional arrows
and pointers. Two sizes per style in most cases. Size: 8 ½" X 7". Thickness: .030".
R-50 POCKET PAL Contains the most commonly used sizes of circles from
1/32" to 1" ; hexes from 1/8" to ¾"; squares from
1/8" to 5/8", triangles from 1/8" to 5/8".
Includes inch scale. Shirt pocket size. Size: 5 1/8" X
3 7/16". Thickness: .030".
Also available in metric, No. R-2050.
R-51 TRIANGLES AND DIAMONDS 30 triangles from 3/32" to 1 3/8". Diamonds up to 2 ¾" may be made by using triangles back
to back. Size: 7" X 4". Thickness: .030".
Also available in metric, No. R-2051.
R-40 CIRCLES Circle diameter sizes from 1/16" to 1 3/8", with 1/16" to 11/32" in
1/64" increments, 3/8" to ¾" in 1/32"
increments, 13/16" to 1" in 1/16" increments and 1 1/8" to
1 3/8" in 1/8" increments. Size: 7 5/16" X 3 7/8".
Thickness: .030".
R-140 LARGE CIRCLES Contains 45 large circles, diameter sizes from 1/16" to 2
¼" in varying increasing increments. Size: 7
3/16" X 8 3/16". Thickness: .030".
Also available in metric, No. R-2140.
R-141 LARGE RADIUS GUIDE Contains 23 radii from ¾" to 6 ½" in ¼" increments.
Locates centre of radius automatically. Includes 12" scale and protractor. Size: 13" X
7 ¼". Thickness: .030".
R-440 EXTRA LARGE CIRCLES Contains 13 extra large circles with decimal
and metric equivalents. Diameter sizes from 1 ¼"
to 3 ½". Corner radii are ¾", 7/8", 1" and 1 1/8".
Size: 11 ½" X 8 ¾". Thickness: .030".
R-540 DECIMAL CIRCLES Contains 66 circles diameter sizes from .100" to 1.000",
with .100" to .500" in .010" increments, and .500"
to 1.000" in .020" increments. Increments of
.010" and .020" are in horizontal rows and
increments of .100" are in vertical rows. Size: 6 ¼" X 8
3/8". Thickness: .030".
R-142 CIRCLES RADIUS MASTER Contains 62 circle diameter sizes from 3/64"
to 7 ½". Size: 7 ½" X 10 3/8". Thickness: .030".
R-70 ELLIPSE SERIES 15 templates from
10o to 80o in 5o increments. Major
axes from ¼" to 2". Template size: 5" X 9 7/8".
No. R-70-10 (10o)
*No. R-70-15 (15o)
*No. R-70-20 (20o)
*No. R-70-25 (25o)
*No. R-70-30 (30o)
*No. R-70-35 (35o)
*No. R-70-40 (40o)
*No. R-70-45 (45o)
*No. R-70-50 (50o)
*No. R-70-55 (55o)
*No. R-70-60 (60o)
*No. R-70-65 (65o)
*No. R-70-70 (70o)
*No. R-70-75 (75o)
*No. R-70-85 (85o)
No. R-70S ELLIPSE SET Set of 10 templates from
15o to 60o only, as asterisked (*) above.
R-403 LARGE ELLIPSE SERIES 16 templates from
10o to 80o in 5o increments.
Includes isometric projection of 35o - 16'.
Ellipses from 2 ½" through 3" in
1/8" increments, and 3 ¼" through 4" in
¼" increments. Template size range: 12 ½" X 5
5/8" through 14 ¾".
*No. R403-25 (25o)
No. R403-3516 (35o-16o)
*No. R403-40 (40o)
*No. R403-50 (50o)
*No. R403-55 (10o)
No. R403-65 (65o)
Thickness for each: .030".
No. 403-S10 LARGE ELLIPSE SET Set of 10 templates from
15o to 60o only, as asterisked
(*) above. Does not include isometric projection.
Packed in a heavy vinyl storage pouch.
R-73 SMALL ELLIPSES Contains 120 ellipses with 12 projections from
10o to 50o. Ellipses from
10o to 50o are in
5o increments, and 50o to
80o are in 10o increments. Ten
sizes from 3/32" to 5/16". Size: 6" X 6 ¼".
Thickness: .020".
Also available in metric, No. R-2073.
R-77 ELLIPSE MASTER Projections of
25o, 35o, 45o and
60o. Contains 60 ellipses from ¼" to 1 3/8". Size: 4 7/8" X 10 ¼".
Thickness: .030".
Also available in metric, No. R-2077.
R-78 ELLIPSE MASTER Projections of
20o, 30o, 40o and
50o. Contains 60 ellipses from ¼" to 1 3/8". Size: 4 7/8" X 10 ¼".
Thickness: .030".
Also available in metric, No. R-2078.
R-123 ISOMETRIC ELLIPSES Contains 38 ellipses from 1/8" to 1 9/16" in
35o - 16o . Ingenious slot arrangement allows drawing
of all three axes without turning template. Size:
11 ¼" X 6 5/8". Thickness: .030".
Also available in metric, No. R-2123.
R-124 LARGE ISOMETRIC ELLIPSES Contains 25 ellipses from 1 ½" to 2" in 1/8" increments, and 2" to 7" in ¼"
increments. Dimensions are shown in halves and lined
up on major axes. Dimensions refer to isometric axes. Size: 9 7/8" X 6 1/16". Thickness: .040".
Also available in metric, No. R-2124.
R-479 COMBINATION ELLIPSE MASTER Contains 79 ellipses with projections of
15o, 30o, 45o and
60o. 15o projections from
3/16" to 1 5/8", 30o from1/8" to 1 ½",
45o from 1/8" to 1 ¾", and
60o from 1/8" to 1 5/8". Size: 11" X
8 ½". Thickness: .030".
R-31 ELECTRONEER All diagrammatic elements of electronic and cathode ray
tubes are provided for, plus tube bases of 4, 7, and
8 prong type, in addition to all symbols in the
field of electronics. Cut-outs beveled for inking.
Size: 6 3/8" X 4 3/16". Thickness: .060".
R-45 ELECTRIC PUBLIC UTILITIES Portrays component parts or elements such
as coils, connections, contacts, instruments, transformers, etc. Symbols may be
combined to represent complete electrical devised.
Size: 6 1/16" X 3 3/16". Thickness: .030".
R-62 POWER AND LIGHT Conforms to designs by the Bureau of Reclamation.
Features symbols of equipment that carry the load from source of power to consumer.
Size: 7 ½" X 5 ½". Thickness: .030".
R-300 ELECTRICAL/ELECTRONIC SET The most comprehensive set of
electrical/electronic templates, taken from ANSI
Y32.2 symbols, grouped into sections for easy use and are in correct relative size so any size
grid can be obtained through photographic reduction. Complete set provides nearly
all electrical and electronic symbols used.
R-304 SOLID STATE ELECTRONICS Used to generate digital logic schematics
for microprocessor systems. Includes integrated circuit, semiconductor, and passive
component areas. Size: 7 ½" X 5". Thickness: .030".
R-308 ELECTRO/LOGIC Various sizes of AND/OR gate and inverter symbols
with selected combination of electronic. MSI and
IC pin layout symbols. Includes 1/10"
and centimeter scale. Size: 5 ¾" X 3 ¾".
Thickness: .030".
R-309 ELECTRO-POCKET DESIGNER Features a combination of
the most used logic and electronic symbols for quick delineation of electronic circuitry.
Shirt pocket size. Size: 3 ¼" X 4 ½".
Thickness: .030".
R-311 ELECTRONIC Contains electronic symbols for designers and draftsmen. Size:
7" X 5". Thickness: .030".
Thickness: .030".
R-312 ELECTRIC CONTROLS Standard symbols to assist in the depiction of circuits
in electrically controlled machinery and electric automation of production processes. Size: 8"
X 3 ¼". Thickness: .030".
R-313 WIRING Ratio: 2:1. Electric and electronic symbols grouped and arranged
for greatest ease in drawing. Size: 7" X 6 1/8".
Thickness: .030".
R-314 ELECTRICAL AND ELECTRONIC 200" grid. ANSI Y32.2. Cut-outs beveled
for inking. Size: 7" X 4". Thickness: .060".
R-316 MISSILE AND SPACE ELECTRONICS Contains symbols
for electronic circuits. Size: 7" X 5".
Thickness: .030".
R-318 ELECTRICAL/ELECTRONIC/LOGIC Conforms to ANSI y32.2 symbology.
Based on line spacing of .15" grid. Designed
for microfilming. Size: 6 7/8" X 5 5/8".
Thickness: .030".
R-327 LIGHTING FIXTURES Contains basic lighting fixture symbols in 1/8" and
¼" scales as used in the construction industry.
Size: 7 3/16" X 5 ¼". Thickness: .030".
R-328 ELECTRO SYMBOLS By simple combination of the various contours,
all symbols in the field of electronics can be
easily constructed. For radio, television and electronics. Size: 9 5/8" X 2 7/8".
Thickness: .030".
R-375 ELECTRO MASTER Electrical and other accepted symbols in the utility and
power and light fields can be made. Cut-outs
beveled for inking. Size: 8 ¼" X 8 ¼" X 45o . Thickness: .040".
R-15 SCREW THREADS Covers the entire range of commonly used
American Standard threads from 20 to 4 threads per inch.
All standard screw diameters from ¼" to 4".
Size: 6 ¾" X 2 ¾". Thickness: .030".
Also available in metric, No. R-2015.
R-56 MACHINE SCREWS Conforms
to ANSI B18.6.3 and ANSI B18.3 specifications. Seven common sizes in top and bottom
views will make 127 different combinations
including socket cap and set screws. Size: 8 ¾" X 6 ¼".
Thickness: .030".
R-57 BOLTS AND NUTS Range of templates from ¼" to 1: as measured across
the flats. Contains 13 hexagons in 1/16" increments. 13 circles serve as tangent
or chamfer circles for hexagons and bolt body diameters. Includes 9 cut-outs for
square heads and nuts. Size: 7 5/8" X 5".
Thickness: .030".
R-81 TOOL DESIGNER Conforms to ANSI B18.3. Head and body diameter
circles with hexes for Allen wrench. Cut-outs for elevation view of head, thread diameter
and thread length of shoulder screws. Size: 8
7/16" X 6". Thickness: .030".
R-121 HEXANGLE Contains 103 cut-outs. Six screw sizes from No. 10 (3/16") to
½" in elevations of 0o ,
15o, 30o, 45o,
60o and 90o. Cut-outs arranged so that chamfer circles
and flats can be drawn with the hexes. Size: 5
5/8" X 8 ½". Thickness: .030".
R-22 ABC ARCHITECTURAL Scale: ¼"
= 1'. For architects, builders and contractors. Contains the symbols most commonly used
in the profession. Includes roof pitch gauge and 16" spacing in 4" modules. Size: 9 ½" X 4 3/8".
Thickness: .030".
R-24 ARCHITECTURAL DETAILER Scale: ¼" = 1'. Contains commonly
used symbols for architectural drawings. Also includes select 3/8" letters and numbers and
as well as ¼" and 1/8" = 1' scales. Size: 8" X
6 ¼". Thickness: .030".
R-25 PLUMBING FIXTURE-ELEVATION Contains standard lavatory symbols
for residential, commercial and institutional installations in ½", 3/8", ¼" and 1/8" scales.
Includes 4 ¼" tile spacing in ¼" scale. Size:
9 7/8" X 5 7/8". Thickness: .020".
R-29 ARCHITECTS' AID Scale: ¼" = 1'.
Handy and useful for the architect and building contractor. Features all of the most
commonly used symbols which can be quickly and
easily delineated. Includes 1/8" = 1' scale and
stair step guide. Size: 10" X 2 ¾". Thickness: .030".
R-33 CBA TEMPLATE Scale: 1/8" = 1'. For contractors, builders and architects.
Includes roof pitch gauge, and 16" spacing in
4" modules. Size: 6 ¼" X 3 5/16".
Thickness: .030".
R-48 SHEETMETAL CONDUIT Designed to facilitate layout of sheet metal conduits
for heating and air conditioning. Dovers all
sizes between 4" and 48". Cross sections,
wither round or square. Size: 9 ¾" X 5 1/16".
Thickness: .030".
R-610 OFFICE PLAN Scale: 1/8" = 1'. Most standard-sized office furniture
and equipment. Size: 6" X 3 3/8". Thickness: .030".
Thickness: .030".
R-700 COMPUTER WORK STATION Contains most commonly used computer
work station furniture and individual modules.
Also includes panel structures, Files, bookcases, chairs, door swings, etc. Size: 9 ¾" X 5"
Thickness: .030".
R-707 OFFICE PLANNER Scale: ¼" = 1'.
For office furniture planning and arrangement. Contains desks, credenzas, files,
bookcases, tables, chairs, sofas, door swings, etc.
Includes ¼" and 1/8" scale on top edge. Size: 10 ¼" X
6 ½". Thickness: .030".
R-709 BANQUET/SEMINAR PLANNER Scale: 1/8" = 1'. For planning banquet,
seminar or conference room layouts. Includes
tables, chairs, door swings, podium, projector
stand, TV, etc. Table pre-spacing is provided for
quick and accurate arrangements. Size: 6 1/8" X 4
1/8". Thickness: .030".
R-710 OFFICE PLAN Scale: ¼" = 1'.
Most standard-sized office furniture and equipment. Size: 8" X 5 1/8". Thickness: .030".
R-712 STORE LAYOUT Scale: ¼" = 1'.
Features the most standard-sized counters and tables for use in laying out store display
cases, counters, etc. Size: 9 1/8" X 5 1/8".
Thickness: .030".
R-714 HOUSE FURNISHINGS Scale:
¼" = 1'. To plan furniture and
appliance arrangement before or after house is
completed or when furniture re-arrangement is contemplated. Size: 8 5/8" X 5 ½".
Thickness: .030".
R-715 LANDSCAPE Scale: ¼" = 1'.
For scaled drawings of the most common shapes and enclosures for landscape layouts. Size:
8 1/8" X 5 ¾". Thickness: .030".
R-716 INTERIOR DESIGN/KITCHEN, BATHROOM, BEDROOM Scale: ¼" = 1'.
To plan interior design for kitchen, laundry, bedroom and nursery. Includes door
swings, fans and plants. Contains notebook ring
binder holes and ¼" scale on top edge. Size: 11" X
8 ½". Thickness: .030".
R-717 INTERIOR DESIGN/TABLES, CHAIRS Scale: ¼" = 1'. To plan table
and chair layout for any room. Includes large
dining room table sizes to the smallest end tables,
and a variety of chair shapes and sizes. Contains notebook ring binder holes and ¼" scale on
top edge. Size: 11" X 8 ½". Thickness: .030".
R-718 INTERIOR DESIGN/LIVING, DINING ROOM Scale: ¼" = 1'. To
plan interior design for living room, dining room
and family room. Includes fireplace, lighting symbols and lamps. Contains notebook
ring binder holes and ¼" scale on top edge.
Size: 11" X 8 ½". Thickness: .030".
R-719 KITCHEN DETAILER Scale: ½" = 1'. A combination of kitchen cabinetry
and appliances to aid in larger scale kitchen designs. Also contains corner gauge,
elevation height gauge and ½" = 1" scale on top edge.
Size 13 ¼" X 6 ¾". Thickness: .030".
R-720 KITCHEN DETAILER Scale: ¼"
= 1'. Same symbols as R-719 template arranged on a
45o triangle with ¼" scale. Size: 7" X
45o. Thickness: .030".
R-1136 STAIR SCALE AND CALCULATOR Combines 10 important scales for
quickly spacing stair risers and treads, rafters,
studs, joists, etc. Also an accurate architect's
scale and a quick, precise calculator for computing
all factors in stair planning. All scales are calibrated 1/8", ¼" and ½" to 1'. Size 3 ¼" X
9 1/8". Thickness: .030".
R-39 PROCESS FLOWPLANNER To facilitate process and flow planning for
piping systems. Features commonly used symbols such as data flags, pumps, jets, flow
nozzles, vessel heads, etc. Includes metric scale.
Size: 7 11/16" X 4 5/8". Thickness: .030".
R-42 FLOW For pipe and plumbing layout; gas, oil, water or chemical.
Group configurations can be constructed by sliding instrument along a straight edge. Size: 10
1/8" X 2 ¾". Thickness: .030".
R-43 ISOMETRIC PIPING Facilitates easily understood perspective drawings
in construction work of refineries, gas and water distribution systems, sprinklers and
other complicated piping work. Contains symbols
of all components of piping systems; valves, flages, elbows, reducers, caps and pumps.
Template can be tilted three ways: one each of the three planes of a perspective view. Size:
8 ½" X 5 ¼". Thickness: .030".
R-44 PROCESS Symbols for the preparation of flow sheet diagrams in
the chemical, food, petroleum, plastics and allied industries. Size: 8 3/16" X 5".
Thickness: .030".
R-47 LABORATORY INSTRUMENTS Symbols for the most commonly
used laboratory recording instruments; manometers, relief valves, pressure gauges,
indicators, signal lights, solenoids, etc. Developed by
the Engineering Department, Instruments Section, E.I. DuPont Company. Size: 8" X 5".
Thickness: .030".
R-49 PIPE FITTING Symbols for pipe O.D., end bell, flange and fittings in 7 sizes
and 6 scales: 1/8", ¼", ½", 3/16", ¾" = 1' scale.
Size: 8" X 5". Thickness: .030".
R-88 FERROUS FLANGED VALVES Scale: 3/8" = 1'. Conforms to ANSI B-16.10.
Sizes from 2" to 8" pipe diameter, both light
and heavy series. Size: 6 3/8" X 5 5/16".
Thickness: .030".
R-55 OPERATION AND FLOW PROCESS Symbols in six most desired sizes. Can
be used for operation and flow process charts
in factory or office. Size: 5 1/8" X 3 3/8".
Thickness: .030".
R-542 STANDARD LOGIC SYMBOLS For digital processing per MIL-STD-806, ANSI Y32.14.
Cut-outs beveled for inking. Available in 4 sizes:
No. R-542 Half size symbols. Size: 5" X 3"
X .060"
No. R-543 Three-quarter size symbols. Size: 6 3/8" X 3 7/16" X .030"
No. R-544 Three-eighths size symbols. Size: 5" X 3" X .030"
R-545 ADPS FLOWCHART Symbols for Automatic Data Processing Systems.
Conforms to MIL-STD 682A and MX 3983/G. Includes 1/10", 1/6" and 1/8" scales. Size: 8"
X 3 ½". Thickness: .030".
R-546 PROGRAM STRUCTURE Symbols used ad part of a system
design methodology commonly called Structural Data Base Analysis and Design. Used to draw
data flow diagramming data structure diagramming and commonly used flowchart symbols.
Card volume, 1/10" and 1/6" scales included. Size
9 7/8" X 4 7/8". Thickness: .030".
R-547 FIPS FLOWCHART Programming symbols for preparing data processing
flowchart documentation in accordance with Federal Specification GG-T1837 A, ANSI X3.5,
ISO 1028. Size: 10" X 5 5/16". Thickness: .030".
R-549 WORK SIMPLIFICATION Contains convenient symbols for use with
work simplification and flow process charting. Includes 1/8" scale on top edge. Size: 7" X 2
1/2". Thickness: .030".
R-550 FLOWCHARTING Symbols conform to ANSI X 3.5 and ISO 1028.
Similar in design to IBM Flowchart template. 1/8",
1/10", 1/15", 1/16" and metric scales included.
Size: 10" X 4".
Thickness: .030".
R-555 FAULT TREE Contains the generally accepted symbols to
graphically display in chart form the anticipated
trouble areas in systems safety analysis. Size: 8" X 4".
Thickness: .030".
R-556 ORGANIZATIONAL CHART Features triangles, circles, rectangles,
brackets and flow arrows used in organizational
chart layouts. Includes ¼", 1/8" and 1/10" scales.
Size: 7 ¾" X 4". Thickness: .030".
R-17 MATHEMATICAL Contains all mathematical symbols, including different
types and sizes of brackets, parentheses, root symbols, integrals, numbers, small
Greek alphabet and the capital Greek letters used
in mathematical and chemical formulae. Size: 6 3/16" X 2 7/16". Thickness: .030".
R-34 WELDING Standard welding symbols conform to AWS A2.4 specifications.
Makes clear, accurate symbols quickly and neatly. Shirt pocket size. Size: 6" X 3 ½".
Thickness: .030".
R-41 HEATING AND AIR CONDITIONING Conforms to ASA Z32.2.3 and ASA Z32.2.4.
Standard symbols for heating and air conditioning. Size: 7" X 5". Thickness: .030".
R-46 FLUID POWER Conforms to ANSI Y32.10. Most commonly used graphic
symbols for fluid power diagramming. Inch and
metric scales included. Size: 7" X 4 ½".
Thickness: .030".
R-52 DIMENSIONING AND TOLERANCING Conforms to ANSI
y14.5M-1982 and ISO/R1101 specifications.
Vertical letters and numbers in 1/8" (3.5mm) size.
Includes arrowhead, delta, balloon and finishing symbols. Size: 7" X 2 ¾". Thickness: .030".
R-53 ARROWS Arrows and North indicators and two sizes of traffic and
road-sign markers. Size: 6" X 4". Thickness: .030".
R-59 PLOTTING SYMBOLS Used by flight test and data reduction engineers
in making graphs, sketches and plotting curves. In 1/8", 3/16" and ¼" sizes. Inch and cm
scales included. Size: 7 ½" X 1 5/8".
Thickness: .020".
R-60 DIMENSIONER For dimensioning, call-outs, and printing. Assures neatness
and uniformity in drawing micro-finish, machine-finish, plus or minus tolerance
symbols, sectional arrows, zone square,
dash-number arrow and circles, and other call-out symbols.
Cut-outs beveled for inking. Size 3 5/16" X 4
1/16". Thickness: .060".
Thickness: .020".
R-83 CHEMICAL RINGS Pentagons, hexagons, heptagons, octagons, chair and
boat forms of cyclohexane rings. Size: 6 7/8" X 5".
Thickness: .030".
R-100 TELEPHONE SYMBOLS Most commonly used symbology for
telephone system layout. Includes additional
related symbols to enhance usefulness. Size: 10" X
5 ¾". Thickness: .030".
R-110 FIRE PROTECTION Contains standardized fire protection symbols for
risk analysis diagrams, fire protection
consulting, fire insurance underwriting, fire
department prefire planning or for fire loss, analysis.
Conforms to NFPA 174 Standard. Includes MM and 1' - 50' scale. Size: 9 7/16" X 6 5/16".
Thickness: .030".
R-125 TRAFFIC SYMBOLS Most commonly used traffic symbols for use
on insurance company and police department accident forms. Particularly useful for
reporting rail accident scenes. Includes 1/10" scale.
Size: 3 5/16" X 8 11/16". Thickness: .030".
R-127 CIVIL ENGINEERS' RADIUS GUIDE 26 radii in scales of 20', 50' and 100' to
the inch. 12 additional printed radii can be used
for center locating. Size: 9 ½" X 7 ½".
Thickness: .040".
R-129 HIGHWAY SMALL RADIUS GUIDE For use by highway and road departments
in layout of interchanges, intersections and many other areas. 33 radii of less than 4" with
scale markings at 20', 50' and 100' to the inch. Automatically locates center of each radii.
Size: 7 3/16" X 10". Thickness: .030".
R-130 TRAFFIC SYMBOLS Similar to No. R-125 template, with emphasis on
general accident reporting. Includes 1" = 20' scale
and 0o - 90o Size: 8" X 3 3/8"
R-131 TRAFFIC ACCIDENT INVESTIGATOR For diagramming traffic accidents on reports
and investigation forms. Used by local police and State Highway departments. Assures
proper proportion and uniformity in description
and interpretation of accident scenes. Includes 1/10" scale and
0o - 90o protractor. Available in
3 sizes:
No. R-131B Shirt pocket size. Size: 6 3/16"
X 2 13/16"
No. R-131A 1 ½ times larger than No. R-131B. Size: 7 5/8" X 3 7/16"
No. R-131 2 times larger than No. R-131B. Size: 10 ¼" X 4 ½"
R-561 RAPID-READER Unique
ruler features center slot opening for reading computer printouts. Slot is ideal for
making notations and highlighting. 1/6" and
1/12" scales measure lines per page vertically and
1/10" scale measures number of characters per line horizontally. 1/16" and cm scales included.
Size: 15 ¼" X 1 ½". Thickness: .040".
R-562 RAPID READER II Same configuration as R-561 in 10 1/2" length.
R-651 TRAFFIC SIGNING For use in the traffic engineering field. Symbols in 24",
36" and 48" scale, taken from the
Federally published "Manual on Uniform Traffic
Control Services" (MUTCD), to assure signing uniformity on all streets and highways in
the U.S. Size: 10 3/8" X 6". Thickness: .030".
R-680 NORMAL CURVE Symmetrical bell-shaped curve used in market
research, sales analysis, quality control and
wherever statistics are taught or used. Includes a
curve indicating confidence limits and intervals and
a normal distribution table. Size: 10 ¼" X 4 ½".
Thickness: .030".
R-1120 SPACE DIVIDER Accurately divides space between any two given
points into 3, 4, 5, 6, 7, 8, 9 or 10 equal segments
up to 8" in length. Automatically locates center
of objects, words, lines, etc. Size: 9" X 9".
Thickness: .030".
R-1200 RAPID-COMPOSER
For the music composer, engraver, copyist, teacher or student to draw engraved style
notes, numerals and symbols. Can be used with a
.7 cm or .9 cm staff size paper or staff lines can be drawn using holes. Includes 6" scale.
Suitable for use with drawing pencils or with #1 technical pen. Includes instruction sheet
Size: 9 ½" X 4 3/8". Thickness: .030".
R-75 RADIUS GUIDE Quick, accurate way to draw radii from 1/16" up to ¾".
Center automatically located when instrument is
placed tangent to the two lines to be joined. Size: 4
3/8""diameter. Thickness: .030".
Also available in metric, No. R-2075.
R-2013 STAR Fourteen 5-pointed stars in inches and metric dimensions. Size 8 ½" X
9 ¼". Thickness: .030".
R-145 OBROUNDS A total of 89 obrounds ranging in size from 1/16" X 3/32"
to ¾" X 1 ½". Printed lines in 1/8" increments
to enable user to draw and shift for longer obrounds. Includes 1/32" scale on top edge.
Size: 8 ¼" X 6 ¾". Thickness: .020".
R-2038 MILITARY SUMBOLS For military tactical troop formation diagramming.
Features common symbols used by the Armed Forces and NATO. Size: 7 1/8" X 4 3/8".
Thickness: .030"
R-2014 METRIC PEE-WEE GENERAL PURPOSE Contains many useful
symbols and geometric shapes. Circles, squares, triangles and hexagons from 3 mm to 1 mm
in varying increments. Size: 12.1 X 6.4cm. Thickness: .5mm.
R-2019 METRIC SKETCH MATE Circles, hexagons, squares and triangles from 3 mm
to 14 mm. Convenient 150 mm scale includes. Size: 16.2 X 8.8 cm. Thickness: .8 mm.
R-2023 METRIC EUROPEAN PLUMBING Scale: 1:50. Comprehensive collection
of plumbing, electrical and architectural symbols
in an easy-to-use arrangement. Symbols are in true metric sizes. 10 meter scale includes.
Size: 24 X 17 cm. Thickness: .8 mm.
R-2030 METRIC SQUARES Contains 35 squares from 2 mm to 30 mm, with 2 mm to
8 mm in .5 mm increments, and 8 mm to 30 mm in 1 mm increments. Squares up to 80
mm may be constructed by using mm scales on edges. Size: 18.8 X 11.2 cm. Thickness: .8 mm.
R-135 BLOCK ALPHABET 3/8" size. Upper case letters and numbers in Block style.
Guide slots featured for freehand lettering. Contains finger-lifts on edges for easy handling.
Size: 6 3/8" X 3 ¾". Thickness: .060".
R-900 GOTHIC VERTICAL SET Set of three guides with upper case vertical letters
and numbers in modern Gothic style. Packaged in vinyl storage pouch. Available individually:
R-905 GOTHIC VERTICAL 5/32" size. Upper case vertical letters and numbers
in modern Gothic style. Conforms to MIL-STD 100-A. Size 7 3/16" X 1 7/8". Thickness: .030".
GOTHIC VERTICAL Upper case vertical letters and numbers from 5/16" to 1" in
modern Gothic style.
R-912 3/8" size. Size: 10 3/8" X2".
R-914 ½" size. Size: 10 3/8" X 2".
R-916 ¾" . Size: 12" X 2 5/8".
Thickness for each: .020".
R-918 1" size. Size: 16" X 3". Thickness:
.030".
R-920 FUTURA LIGHT 5/32", 3/16",
¼" SIZE. Upper case vertical letters and
number in Futura style, Light. (.035" slot). Size: 10
3/8" X 2". Thickness: 020".
R-960 GOTHIC VERTICAL 1/8",
3/16", ¼" size. Upper case vertical letters
and numbers in modern Gothic style with automatic equal spacing guide lines. To use, simply
line up printed vertical lines with edge of
previous letter. Size: 10 3/8" X 2". Thickness: .020".
R-961 GOTHIC VERTICAL 5/32",
3/16", ¼" SIZE. Upper case vertical letters
and numbers in modern Gothic style with equal spacing guide lines. Size: 10 3/8" X 2".
Thickness: .020"
R-962 GOTHIC VERTICAL 1/8",
3/16", ¼" SIZE. Upper case letters and numbers
with 1/8" lower case. Size: 10 3/8" X 2".
Thickness: .020".
R-963 GOTHIC VERTICAL 3/32",
5/32", 3/16" size. Upper case letters and
numbers with 3/32" lower case. Size: 10 3/8" X 2".
Thickness: .020".
R-940 GOTHIC SLANT HI-LO SET Set of three guides with
15o slant upper and lower case letters and numbers in modern
Gothic style. Packaged in vinyl storage pouch. Available individually:
No. R-944 1/8" size. Size: 7 3/16" X 2".
No. R-946 3/16" size. Size: 7 3/16" X 2".
No. R-948 ¼" size. Size: 7 3/16" X 2".
Thickness for each: .030".
R-970 GOTHIC SLANTED 1/8",
3/16",1/4" size. Upper case slanted letters
and numbers in modern Gothic style. Size: 10
3/8" X 2". Thickness: .020".
R-971 GOTHIC SLANTED 5/32",
3/16", ¼" size. Upper case slanted letters
and numbers in modern Gothic style. Size: 10
3/8" X 2". Thickness: .020".
R-972 GOTHIC SLANTED 1/8", 3/16",
¼" size. Upper case slanted letters and
numbers with 1/8" lower case in modern Gothic style.
Size: 10 3/8" X 2". Thickness: .020".
R-973 GOTHIC SLANTED 3/32",
5/32", 3/16" size. Upper case slanted letters
and numbers with 3/32" lower case in modern Gothic style. Size: 10 3/8" X 2".
Thickness: .020".
R-964 MICROFONT 1/8", 5/32",
3/16' size. Vertical letters and numbers in
Microfont style with equal spacing guide lines. Size:
11 ¼" X 2". Thickness: .020".
R-972 GOTHIC SLANTED 1/8", 3/16",
¼" size. Upper case slanted letters and
numbers with 1/8" lower case in modern Gothic style.
Size: 10 3/8" X 2". Thickness: .020".
R-924 LARGE LETTERING AID 1/8", 5/32" and ¼" size slots for freehand lettering
or drawing guide lines. Can be used to draw full width lines on 8 ½" X 11" paper with
margin spacing as needed. Guide lines are for equidistant spacing. Inch and CM scales.
Size: 10" X 4 ¼". Thickness: .030".
R-925 LETTERING AID 1/8", 5/32",
3/16", ¼" size slots for freehand lettering or
drawing guide lines. Cut-outs beveled for inking.
Guide lines for equidistant spacing. Size: 6 7/8" X 3
3/8". Thickness: .060". Also available in
metric, No. R-2925.
R-926 LETTERING AID 1/16", 3/32",
1/8", 5/32" size slots for freehand lettering or
drawing guide lines. Inch scale included. Guide
lines for equidistant spacing. Size: 7" X 3 5/8".
Thickness: .030".
R-980 OLD ENGLISH, UPPER CASE 3/8" size. Both upper case letters and numbers in
Old English style. Size: 10 3/8" X 2".
Thickness: .020".
R-2127 METRIC CIVIL ENGINEERS' RADIUS GUIDE Contains 25 radii in 6 scales.
Automatically locates centers. In 1:1, 1:200, 1:400, 1:500, 1:800 and 1:1000 scales.
Cut-outs beveled for inking. Size: 25.5 X 20 cm. Thickness: 1 mm.
R-2040 METRIC CIRCLES Contains 37 circles from 2 mm to 30 mm, with 2 mm to
10 mm in .5 mm increments, and 10 mm to 30 mm in 1 mm increments. Size: 18.1 X 10.2 cm.
Thickness: .8 mm.
R-2050 METRIC POCKET PAL Most commonly used sizes of circles,
hexagons, triangles and squares. Includes 100 mm scale.
Shirt pocket size. Size: 14 X 9 cm. Thickness: .8 mm.
R-2051 METRIC TRIANGLES AND DIAMONDS Contains 34 triangles from 3
mm to 30 mm, with 3 mm to 9 mm in .5 mm increments and 9 mm to 30 mm in 1
mm increments. Diamonds may be constructed by using triangles back to back. Size: 18.7 X
10 cm. Thickness: .8 mm.
R-2073 METRIC SMALL ELLIPSES Contains 120 ellipses with 12 projections
from 10o to 80o . Ellipses from
10o to 50o are in
5o increments. Size 15 X 16 cm. Thickness:
5 mm.
R-2075 METRIC RADIUS GUIDE Quick, accurate way to draw radii from 1.5 mm up
to 20 mm, with 1.5 mm to 8 mm in .5 mm increments, and 8 mm to 20 mm in 1
mm increments. Center is located automatically when instrument is placed tangent to the
two lines to be joined. Size: 14 cm approx. Thickness: .8 mm.
R-2077 METRIC ELLIPSE MASTER Projections of
25o, 35o, 45o and
60o. Contains 68 ellipses from 5 mm to 30 mm, with 5 mm
to 15 mm in 1 mm increments and 15 mm to 30 mm in varying increments. Size: 12.5 X
26.5 cm. Thickness: .8 mm.
R-2078 METRIC ELLIPSE MASTER Projections of
20o, 30o, 40o and
50o. Contains 68 ellipses from 5 mm to 30 mm, with 5 mm
to 15 mm in 1 mm increments and 15 mm to 30 mm in varying increments. Size: 12.5 X
26.5 cm. Thickness: .8 mm.
R-2123 METRIC ISOMETRIC ELLIPSES Contains 38 ellipses from 3 mm to 40 mm in
1 mm increments. Ingenious slot arrangement with mm scales allows drawing of all three
axes without turning template. Size: 32.4 X 18.3 cm.
Thickness: .8 mm.
R-2124 METRIC LARGE ISOMETRIC ELLIPSES Contains 29 ellipses from 35
mm to 175 mm in 5 mm increments. Dimensions are drawn in halves and lined up on their
major axes. Dimensions refer to isometric axes. Size: 24.8 X 15.1 cm. Thickness: 1.0 mm.
R-2140 METRIC LARGE CIRCLES Contains 44 large metric circles, diameter
sizes from 2 mm to 50 mm in varying increasing increments. Size: 18.5 X 21 cm. Thickness:
.8 mm.
R-2141 METRIC LARGE RADIUS GUIDE Contains 27 radii from 20 mm to 150 mm in
5 mm increments. Locates center of radius automatically. Includes cm scale
and protractor. Size: 33 X 18.5 cm. Thickness:
.8 mm.
R-2440 METRIC EXTRA LARGE CIRCLES Contains 13 extra large metric circles.
Diameter sizes from 25 mm to 85 mm. Corner radii are 5 mm, 10 mm, 15 mm and 20 mm.
Size: 29.2 X 22.2 cm. Thickness: .8 mm.
R-2960 METRIC GOTHIC VERTICAL 3 mm, 5 mm, 6 mm size. Upper case
vertical letters and numbers in modern Gothic style
with automatic equal spacing guide lines. To use, simply line up printed vertical lines with edge
of previous letter. Size: 26.3 X 5 cm.
Thickness: .5 mm.
